PROFIBUS using Siemens S7-300 (Modules 1-2)

PROFIBUS using Siemens S7-300 (Modules 1-2)

Duration: 2 days

Course Outline

Module 1
This module begins with an introduction of the training demo and then addressing methods available with the S7 family is covered. Next, there is a PROFIBUS overview followed by PROFIBUS Cabling. Students will receive a basic understanding of the function of GSD files. Students will learn how to configure, add and define slaves. To complete the module, the student will be able to apply the error OB's that apply to PROFIBUS communication.
Lessons
   Introduction to the Demo
   Addressing Methods
   Overview
   Cabling
   GSD Files
   Configuring and Adding Slaves
   OB82 OB86 and OB122
Module 2
In this module the student will be able to configure remote I/O devices on PROFIBUS, troubleshoot I/O communication faults and use FC125 to program diagnostic functions. Next, the Sync/freeze commands are covered, as well as, deactivating DP I/O and reading diagnostic data from a slave. To conclude the module using a CPU as a DP slave is explored.
Lessons
   Remote I/O - Diagnostics
   Remote I/O - FC125
   Sync/Freeze Deactivating
   CPU as a Slave

PROFIBUS using ControlLogix

Duration: 1 day

Course Outline

Module 1
This module covers all aspects for using PROFIBUS with ControlLogix and the Woodhead SST PROFIBUS card. An overview is given to provide the terminology and advantages of PROFIBUS. The hardware side is reviewed including cabling, connectors and termination. Details about the SST PROFIBUS scanner card and the SST Configuration Tool provide the student with the knowledge to configure and begin using the module. Finally, helpful diagnostic troubleshooting tips are given for fixing errors on the network.
Lessons
  Overview
  Cabling
  SST PROFIBUS Scanner
  SST Configuration Tool
  Diagnostics

(source : http://www.automationtraining.ca/)